atom rigenerabili RDA

The Flave EVO 22mm by AllianceTech Vapor-SS

The Flave EVO 22mm by AllianceTech Vapor-SS

€ 95,00 € 79,00

I prezzi sono comprensivi di IVA

Disponibilità: 5

Produttore ALLIANCETECH VAPOR
Codice Prodotto
Colore
Generalmente spedito entro 2 giorni lavorativi: se ordini oggi, il prodotto verrà spedito entro giovedì 17/10/2019.

Alliancetech Vapor has achieved a real tour de force. In just over a year, the name of their flagship timer has become a trademark. Who has never heard of their Flave? This range of attomiser has made a big impression in the middle of the vape. Available as a dripper or in a tank version, everyone can find themselves there. Combining power and flavour, it's a must-have today.


So it's time to propose the natural evolution of this Flave, with an EVO version, this time in 22mm!


The Flave EVO 22 by AllianceTech Vapor - SS version

Alliancetech Vapor has achieved a real tour de force. In just over a year, the name of their flagship timer has become a trademark. Who has never heard of their Flave? This range of attomiser has made a big impression in the middle of the vape. Available as a dripper or in a tank version, everyone can find themselves there. Combining power and flavour, it's a must-have today.

So it's time to propose the natural evolution of this Flave, with an EVO version, this time in 22mm!

The French Touch

Alliancetech Vapor has made itself known over the years thanks in particular to a clever offer of accessories. The vaping community appreciate their drip-tips, the Pin BF (Goon, Petri, Apocalypse) and share their attachment to the Norbert stomizers: Big boron, beauty ring, etc...  Let's add the AFMOD and lately The Flave, and the picture is enticing! All 100% Made in France to not take anything away!

Alliancetech Vapor works precisely on high-quality materials. The Flave EvO is no exception. The joints are fitted, and stainless steel brings aesthetics and strength. We are above what is proposed by the rest of the Flave family. And that doesn't say much!

The Flave EVO, a new look!

The Flave EVO poses from the outset as an atset with a sober but worked look. The difference with the old version, the Flave dripper (in 24 or 22mm) is obvious. In addition to the much superior finish, it is in terms of design, and in particular the size that the evolution is clear. He literally loses a floor! Exit the imposing side. The whole thing is much more harmonious on a box or tube, notably thanks to its diameter of 22mm. 

And that says low size (low profile) says reduced room. Hard to do more picked up!  This design, in addition to strengthening the density of the steam produced, brings an essential thing thanks to the dubbing of the drip tip (the drip tip fits on a black delrin base): a heating almost non-existent. Also worth noting, it is fine, saving a precious space on the board!

The drip tip, in black delrin, is thicker externally than that of its ancestor. The inner diameter is about the same. Imposing at first, it proves very pleasant to use.

A much more efficient tray!

 To the eye, users (warned) of course reported the glaring similarities with the classic version. And that's true. But after a few minutes of use, the verdict is clear. We're way ahead. The main reason? The new airflow. It is regulated by rotation of the top cap, in a classic way, but instead of a channel, 4 holes (two on each side). It is slightly tilted (to avoid oversquonking) and is symmetricalon on either side of the attomiser. The air passes under the coil on both sides.

Another radical change in the airflow is that the holes are smaller. At a time when the MTL notation returns to the forefront, The Flave EVO in 22mm plays the card of modernity. These airflows, more moderate, play the card of finesse and softness!

In the 4-hole position, you'll still get a powerful, airy rendering (which makes the Flave famous) less open. Less noisy. Very little whistling as long as your mount is good.

In the 2-hole position, the draw is more restrictive, and much more accurate than what we could have on the classic Flave by manually adjusting.

Coupled with the reduced room, the rendering really gains in precision. And that already makes a key difference.

On the plateau side, we remain on the same basis: a single coil assembly easy to achieve thanks to the notches on the edges of the tray and a milled base to accommodate more liquid in the tank! The two mount studs are located on either side of the atset on the edges. Slight change in screws: wide and cruciform, they greatly facilitate the assembly. The latter are exceptional. More robust, solid, and ingenious system that prevents ripper. On top.

There's plenty of room for your coils and it's quick to do.

An EVO-lution

With its complete packaging (pin BF / non BF, joints), its team always as nice and professional (it's always better:) ) the Family of Flave grows, yes, but above all is refined.

Like a watchmaker, AllianceTech Vapor was able to touch the points that could be improved, while maintaining a solid, very solid base.

Between returning to basics and increased pleasure, we can only advise you to jump with your throat open on this Flave 24 EVO!

The Flave EVO 22 SS by AllianceTech Vapor comes with:

- Classic Pin x1

- BF Pin x1

desideri maggiori informazioni?

Contatta il Servizio Clienti

Scheda del marchio ALLIANCETECH VAPOR

Ultimi prodotti visualizzati

I cookie ci aiutano a fornire i nostri servizi. Utilizzando tali servizi, accetti l'utilizzo dei cookie da parte nostra. Informazioni